What should be noticed about low bridge glasses?
At the same time, the weight of your frame should be evenly distributed across the bridge of your nose or on the nose pad of the frame. If the bridge sinks into your nose, either your nose pad needs to be adjusted better, or you need to find a frame with a wider bridge. In addition, the temple or handle of the glasses should be long enough to fit close to the ear. You should be able to move your head without slipping or slipping off your glasses. In short, for those with a lower nose, a triple match requires that the nose chassis have a thicker or adjustable nose pad, a narrower nose bridge, a wider nose bridge, and a shorter lens. If you have bought a plastic frame in the past or present, you should be able to find the size of your bridge on your current frame. Traditionally, the middle number corresponds to the measurement of the bridge. It is important to look at the position of the bridge on the frame.
Men's clear glasses are a fashion item.
A clear glasses frame is not only for a schoolgirl. Clear and transparent design more feel cool and refreshing in scorching summer. At the same time, it will not cover the facial features too much, making the face more delicate and clean. Small pure and fresh picture frames tie in some of the clothes of literature and art naturally. Therefore, the scope of use of clear glasses is very limited, only suitable for fashionable men.
Choose clear glasses for kids to keep safe.
Safety is very important no matter in what aspect, glasses are no exception. Especially for children, they are more active. The lens is best made of PC, and the frame is best made of materials with high toughness, such as TR90. Service fixed number of years of this kind of picture frame is long.
Why do you need to wear safety goggles correctly?
Eye strain occurs when muscles are tired from strenuous exercise (from tension to concentration), similar to what happens to other muscles in the body from strenuous exercise or overuse. Eyestrain is the result of eye pain and fatigue, often accompanied by headaches. Eye strain has a lot to do with the quality of your glasses. If you wear cheap and inferior safety glasses for hours at work, you will feel uncomfortable. While your eyes won't be permanently damaged by fatigue, it can affect your productivity.
Type of eyeglasses cloth
There are many kinds of cloth for glasses. There is mainly sheepskin eyewear cloth, and there is microfiber eyewear cloth. There are suede and double-sided cloth and so on. Professional eyewear cloth must use more than 200 grams of weight/per cubic centimeter of microfiber. This kind of raw material chemical fiber is fine, and tactility is soft, so it will not damage the lens. This kind of wipe cloth can be used on a computer screen. The two sides of the cloth are different, and the smooth side is used to scrub the lenses. Because the dirt on the lens is mostly small. The rough side is designed to give you more friction when you touch it with your finger, so you can use it more easily, and you can clean it more.
The spirit behind celluloid glasses
Because celluloid material is flammable, it cannot be mechanized and basically needs to be created by hand, which forms a unique set of handcraft modes of Japanese crafters. Today, there are only a few celluloid factories in Japan, and the unique manual process and production are relatively small. This makes celluloid handmade glasses even rarer and more valuable. Celluloid was originally a very common and cheap material, even with a certain degree of danger, but because of the unique craftsmanship of skilled craftsmen, its performance was brought to the extreme, so that celluloid glasses became unique and sought after by some people. The material of the frame is an important factor that determines the comfort of the glasses. While ensuring comfort, people hope that the glasses can have a decorative effect and play a role in clothing matching in different scenes.
What color coating is good?
The purpose of plating anti-reflection film is to reduce the reflection of light. But because it is impossible to be completely free of reflected light, there will always be some residual reflection on the surface of the lens that causes the visible color. Someone asks which kind of these residual color is best. It does not have a standard actually. It is mainly based on a personal preference for color. More on the market at present is green color. However, these residual colors can initially help us to judge the thickness of the film: when the film is thin (the thickness is less than 139nm), the reflected light will show light yellow, and when the film is thick (the thickness is more than 139nm), it will show blue-green. The current multi-layer anti-reflection film thickness is about 0.3μm.
