Choose clear glasses for kids of suitable temples and nose pads.
Children's head is very different from adults, especially the height of the bridge of the nose. Most children's bridge of the nose is low. Therefore, it is best to choose a high nose pad for children's glasses or an adjustable eyeglass frame for the nose pad. The temples of the glasses should not cause uncomfortable pressure and the glasses should be kept in the correct position. Sporty temples are another option. The temples are very flexible, and they fit well into a child's ear. It should extend to the earlobe and be covered with soft plastic.
SAFE HANDLER Duarte Premium Over The Glass Safety Glasses
Impact-resistant polycarbonate lenses are used. It fits most head sizes comfortably without slipping while providing comprehensive protection against industrial hazards. These glasses have shatterproof and high-impact lenses. The ultralight design encourages less slippage and reduces harm. Fully covered UV400 scratch-proof and fog-proof coating, providing the best protection. They are suitable for different environments, and weather conditions, including automobiles, construction, painting, laboratory work, etc.
Color process of Contact lenses
Pigment printing process
It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.
Pigment build-in process
To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.
The pressed film manufacturing process
This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.
Glasses are no longer ordinary daily necessities. A pair of glasses not only can assist eyesight, but also enhance or even change your temperament. In addition to the material, color, and shape, when choosing glasses, the most important thing is to match your face. Some frames are really good-looking, but they will be scary if they don’t match the shape of your face. Today we will talk about how to choose glasses according to your face shape.
Why Are My Progressive Lenses Blurry?
So, why are my progressive lenses blurry on sides? It can be caused by a lot of reasons, and we will list some of them.
The strength of progressive lenses is the factor that leads to initial peripheral blurriness. Progressive lenses tend to be blurry on the sides because each lens promotes three fields of vision. In addition, peripheral blurriness or haziness is a sensation that typically develops because more than one lens has been incorporated into one lens. The wearer also might feel as if he or she is moving from side to side.
After learning what may cause progressive lenses blurred, so how can you adapt to the progressive lenses? Therefore, in the following section, we will show you how to get used to progressive lenses.
Other features of high-quality titanium frame glasses
They are clear, with shiny surfaces, no scratches, corrosion, and other problems of the temple. The regular manufacturer prints the article number, size, etc. on the glasses frame. Open and make the temples flat, to see if it is tilted at an angle between the glasses body and temples, and to see that if the frames have the same size if the parts of the frame are symmetrical, etc.
Choose the frame according to the face shape
Just like hairstyles and beards, frames should also be chosen according to your face shape. Of course, there is more than one frame for each face shape, and you can also prepare a few more pairs for yourself to match different styles. Try to avoid wearing spectacle frames that are too similar to the face shape, so as not to cause the lines of the face to be over-emphasized. Usually, the shape of the face is round, oval, square, rectangle, and heart-shaped. For example, if your face is square, you should choose glasses frames that are slightly wider than the shape of your face. This will make your face shape looks slightly slender. If the face is round, angular and square frames will help modify the lines of the face.
