How to Find Reading Glasses Strengths?
Some reading glasses also come with strengths. So, how do you know what strength reading glasses to get and how to find reading glasses strengths? The strength of all reading glasses is measured in dioptre, with units increasing by 0.25 dioptre depending on the power of the lens.
The reading glasses strengths range from +0.75 dioptre to +3.00 dioptre. Both lenses have the same power which is indicated by a permanent marking on the inside of the frame or with a removable sticker on the lens. So, you can find the reading glasses strengths of the glasses.
The important thing you need to notice is that when higher the number, the greater the power of the lenses is when choosing reading glasses. So, glasses with a marking of 1.0 are low power while those marking +3.0 are high powered.
How to Keep Glasses from Slipping
Stick-on Nose Pads
Nose pads would be a good choice to prevent glasses to slide down your nose. Hence, you can stick a pair of rubber pieces in the nose pads of your glasses or you can choose a pair of glasses with rubberized nose pads. If you want to try a pair of nose pads glasses, the Koalaeye Optical may be a good choice. The rubber nose pads will make you feel steadier and better and the additional resistance on the nose pad will surely provide more support. So, if your glasses often slip down from your nose, try this way.
Wax Coating
To keep glasses from slipping, you can try wax coating which is a smart move. Use the wax on your nose pad area along with the temple where the glasses come into contact with the skin. In general, it works fine and it is nearly invisible.
Temple Ear Hook
The temple ear hook is a good way to keep glasses from slipping. It can provide mechanical support behind the ear and you will feel the support from the back of your ears. But the drawback of the temple ear hook is that it is quite visible. When you take off the lenses, you need to lift the temple higher so that the ear hook could clear the ear’s crest. Besides, the cheaper one might cause some discomfort to the back of your ears because of the pressure.
Rubber Bands and Hair Ties
To keep glasses from slipping, you can also try hair ties and rubber bands. You can tie one around the temple tip behind your ear so that it can provide both slight mechanical support and friction forbidding your glasses from moving around. What’s more, this is a low-cost method.
Adjustment of the angle of the nose pad
For the angle of the nose pad, you can apply torque in the horizontal or vertical direction according to the deformation needs. It can be held in the proper part of the nose pad with needle-nose pliers, and the torque can be applied at a certain angle in the vertical plane or horizontal plane to achieve the purpose in accordance with the deformation needs. In the time of repeated actions, in order to prevent the welding place of the nose pad and the glasses ring from breaking due to repeated stress deformation, you can use your fingers to apply external force at the welding place to change the deformation position and play the purpose of protection.
The frame of prescription glasses
At present, the more common materials for frames are non-metal and metal. Non-metals mainly include TR90, sheet material, etc., and metals include alloys, titanium, and so on. TR90 and sheet material are actually plastics, but they are firm and are not easy be deformed at room temperature. Also, they have good formability so that they can be made in many fashionable styles. The general alloy material has good firmness and flexibility, but the disadvantage is that it is easy to fade. The pure titanium frame is corrosion-resistant and very strong. It is about 40% lighter than the general alloy frame. It must be welded and electroplated in an oxygen-free state, which requires high equipment and technology. Relatively speaking, the price of TR90 and alloys will be lower, and pure titanium will be more expensive. You can choose according to your budget.
Choose a quality progressive lens.
Superior progressive lenses provide a better viewing experience. They also remove any distortions you might feel when reading what's in front of you. Lenses can also be coated with special coatings. Anti-reflective coating can prevent glare on the road, and anti-scratch coating can reduce wear marks.
How to stop glasses hurting behind ears?
When adjusting glasses to the optical shop, you can let the staff check if the bending hook is flat. If there is a problem, put it on the polishing machine. The most important thing is that when adjusting the glasses, the height of the glasses temple should be adjusted according to the shape of each person's face, to further increase the comfort of the glasses. Furthermore, if you do not want to go to the optical store, you can make the glasses temple a little loose at home or put a little cotton or paper towel in the ear to prevent friction. You can buy soft eyewear online or at an eyeglass store to prevent ear friction and injury
Is Anti Glare Worth It?
Is anti glare worth it? To answer this question, you need to know the benefits of the anti glare glasses first. Anti reflective coating and anti glare coating offer many benefits and are definitely worth the extra cost, especially if you find yourself bothered by glare. They can help you see better, look better and feel better.
Here, we will list some of the benefits of the anti reflective coating.
- They can improve your vision by reducing bothersome reflections and glare.
- They can also provide comfort during prolonged computer use as the glasses for computer use.
- They improve visual acuity by allowing more light to reach your eyes.
- They can reduce the effect and symptoms of digital eye strain.
- They make your eyes more visible behind your lenses.
- They provide less glare when driving at night.
So, is anti glare worth it? From the above information, you can find that anti glare glasses or anti reflective glasses are worth the cost.
