About industrial pure titanium
For the industrial pure titanium, titanium content is not less than 98%, containing a small amount of oxygen, nitrogen, hydrogen, carbon, silicon, and iron impurities such as dense metal. The labels are TA1,TA2,TA3,TA4. It's arranged by more and more impurities. The TA1 titanium content is more than 99.5%, and the price is not high. But no matter which links, for molding, welding, polishing, processing difficulty is very great.The price of almost all titanium alloys in the national standard is higher than that of pure titanium.
In reality, the price of β titanium is higher than pure titanium. Pure titanium is almost no elastic, but β titanium is not only elastic, and has the advantages of ultra-light corrosion resistance. β titanium does not have a specific composition. Memory titanium can cost tens or even tens of times as much as pure titanium.
Using memory alloy to make glasses frame is the use of its superelastic characteristics at a certain temperature (elasticity is several times that of stainless steel) and did not use its memory function. Compared to beta-titanium, memory titanium is so difficult to process. It is so elastic that shaping is difficult and impossible at room temperature, and memory titanium heat treatment is another difficult and even secret process.
Your glasses are not symmetrical.
If one side of the frame looks higher than the other, you need to adjust the arm. If the right side is higher than the left, gently bend the left arm at the hinge or where the arm bends behind the ear. If the left side is higher than the right, gently bend the right arm at the hinge or where the arm bends behind the ear. Adjusting the frames a little at a time may damage your glasses. Place your arms in warm water to make them easier to adjust. Use only warm water from the tap. Don't use boiled water! Because it affects the coating on the lens. If one adjustment is not in place, it can be adjusted several times, and the above methods can be comprehensively used. If the adjustment is really bad, then you have to go to the optical shop to ask the staff to adjust.
Color process of Contact lenses
Pigment printing process
It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.
Pigment build-in process
To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.
The pressed film manufacturing process
This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.
How about the optician center at Walmart?
Sixty-four percent of American adults wear prescription glasses, more than 157 million people. Since Walmart is the largest manufacturer of finished prescription glasses in the United States, the glasses are likely to come from Walmart. In reality, it's the only product they produce from start to finish. The ultimate goal of Walmart Glasses is to serve more customers faster and with better quality.
The optician center is not very big, but there are many kinds of glasses frames, and Walmart is the big backing, so the quality is relatively reliable. There are famous brands of lenses, a little more expensive, but certainly cheaper than the nearby optical stores. And you can pick and choose.
How to Get Used to Progressive Lenses?
It is common that your vision may change when you are over age 40. You can find it is happening when have to hold your favorite book, the daily newspaper, or a restaurant menu farther away just to read it. This is an eye condition called presbyopia. It is normal and almost all of us get it as we reach middle age.
This eye condition often can be corrected by progressive lenses which allow you to see objects from far to near clearly. With progressive lenses, you do not have to switch your glasses to see far or near objects frequently.
However, since progressive glasses have three different prescriptions in one lens, it may be difficult for some people to adapt to the new ones. So, in this post, we will show you how to get used to progressive lenses.
Choose Quality Merchants
Online shops are of all kinds, from different parts of the country. We need to find a professional and reputable shop, with the help of some small skills. For example, from the purchase of some users of the use of evaluation, store credit rating, store introduction, and other aspects, we determine the overall situation of the store and finally buy in this store.
Can blue glasses double up as sunglasses?
The main function of sunglasses is to keep out dazzling strong light, to reduce the eye adjustment that causes fatigue or the harm that strong light stimulation causes. Their light transmittance is very low, only suitable for use when the sun is strong outdoors. If wearing sunglasses indoors, or at dusk, or even in the evening, because the light is reduced, it will not play a role in protecting the eyes or even will increase the burden of the eyes. The Anti-blue lens is yellow-green and needs to meet the transmittance and blue obscurity. If you are walking outdoors for a short time, good blue light glasses can of course completely meet your outdoor eye protection needs, but due to the high light transmittance, it is not suitable for a long time outdoors, as the sunglasses. Because although it can block UV rays, they are not very good at the filtering of strong light. General anti-blue glasses can not be equal to sunglasses, the main function is not the same, and the use of the scene is not the same.
