Change the lens.
If you like your frames, but your prescription changes or the lenses are damaged, you can simply replace the lenses in the existing frames. Most optical shops will let you choose this method to reduce waste and save money. It is recommended that you take the frame to your local store and talk to the team. They will be able to assess the suitability of your eyeglasses and will be able to give you a quote based on your requirements.
What effect does a lens with the hard film have?
In order to improve the wear resistance of the lens, it is necessary to coat the surface of the lens with hard film. At present, silicon atoms are used to stiffen the membrane, that is, the stiffening solution containing organic matrix and inorganic superfine particles including silicon element is used to make the hard film have toughness and hardness at the same time. Because the common resin lens is far easier to wear than the glass lens, so the addition of hard film is mainly used for resin lens. It is usually applied to the front surface of the lens, and the anti-wear ability of the resin lens with the film will be enhanced a lot, and the light permeability will be strengthened.
How to determine whether progressive lenses are worn correctly?
Once your glasses are back from the lab, the optometrist will let you put them on for an audition and make final adjustments to make sure they fit. If the prescription is not in the center of the lens, it will make it difficult for you to see clearly. The key is that the lenses match the wearer's eyes, especially the pupils. Before ordering a new lens, the optometrist takes two measurements: pupil distance and fitting height.
Put into the lens box when not in use.
When taking off glasses, many people will easily hang them on the head, collar, or casual display, so that glasses often suffer a variety of damage. To do this, fold the glasses and place them face up in the case. Do not place your glasses in direct sunlight or in high temperatures, as heat can easily peel off the film on the lens. For example, in summer, the glasses are exposed to direct sunlight in the car for a long time, which is easy to cause lens stripping.
Difference Between Sunglasses and Optical Frame Glasses
Sunglasses are basically applied to block sunlight and adornment effect. But in the choice of lens material and lens craft respect, it is not very particular. Correspondingly, consumer wears for a fixed number of years, to be in one season or two seasons. Sunglasses are sold with obvious seasonality. Optical glasses are mainly suitable for the use of photometric glasses. Both the lens material and the production process have higher requirements. A panchromatic or half chromatic resin lens is added to an optical lens, and then they can be sunglasses and can try luminosity, made of myopic sunglasses.
Are yellow lenses good for night driving?
Yellow lenses are very effective even in low light conditions. They enhance contrast while you're driving. In other words, they broaden your horizons and allow you to see more cars, people, and objects on the road. Especially when you're driving at high speeds on dark roads, this widened, enhanced view can help you see more clearly. The transparent driver's glasses effect is not good. Headlight glare can be understood as dazzling light. The lens should be looked for from the angle of the stain. But the color should not be too dark to ensure safe driving at night. It is better to polarize the light. It can greatly improve the anti-glare effect.
Transition Lenses Problems
Here, we will show you some common transition lenses problems.
Transition lenses are typically embedded with photo-sensitive chemicals or coated with similar films that produce the shading effect when exposed to light. This process makes the lens more expensive to manufacture and focuses on prescription glasses, thus raising the transition glasses cost. The transition lenses cost may be twice of the regular glasses lenses.
When you are driving with the transition glasses, they will fail to work. Car windshields typically come standard with anti-glare effects or films and laminates that break up some of the direct sunlight that enters the vehicle. This will reduce the transition lens effects, causing them to register a non-lit condition when the direct sunlight can actually be very bright.
