What Do the Numbers on Glasses Mean?
The first number on glasses frames is the eye size. It is the horizontal width of the lenses. In general, the number of eye sizes varies from 40 mm to 62 mm in most of the spectacle frames.
The second number is the bridge size. It is the distance between the lenses. Also, it is the bridge that rests upon your nose. Mostly, the size of the bridge on glasses frames would be from 14 mm to 24 mm.
The third number is the temple length. It is the length of the stems of the frame that rests upon your ears. It can be measured from hinge to the end tip of the temple. In general, the temple length in most cases is from 120 mm to 150 mm. The bridge and temple help the frame to comfortably fit on the face.
Meanwhile, if there are no numbers on glasses frames, do not worry. You can always measure your eyeglasses frame with a millimeter ruler. Sometimes, the tiny numbers are worn off or sometimes they are printed too small that you might have to use the magnifying glasses. If you have known the glasses numbers meaning, you can choose to measure them by yourself.
At the same time, to fit the glasses better, you can also choose to measure your face for glasses frames. After knowing the suitable size of glasses, you can choose to buy a pair of glasses online. Thus, Koalaeye Optical is recommended. It is an online glasses store and provides all kinds of glasses, sunglasses, and frames. What’s more, these glasses are stylish and cheap.
How to Get Used to Progressive Lenses?
How to adjust to a pair of new glasses? How long does it take to adjust to a new pair of glasses? In general, there are several ways for adjusting to progressive lenses. In this section, we will show you some of them.
- Put on your new progressive glasses in the morning and wear them for at least one hour or two. The next morning, try a few more hours. Develop your tolerance to adjust to them.
- When you walk, look straight ahead, not down at your feet. And, point your nose in the direction you want to look, not just looking left or right with your eyes.
- Don’t switch between your new pair and the old one frequently.
- Make sure your progressive glasses fit properly and don’t slide down your nose.
- When you read, don’t move your eyes or head. Move the page or paper instead.
- Set your computer screen below eye level. You can achieve that by adjusting your desk or chair.
Glasses Size - Temple Length
The length of the temple is the length of the arm of your glasses. It's how far the arm is bent, all the way to where it intersects the frame. Although lengths may range from 120 to 150 mm, there are some common industry standards:135, 140, 145, and 150 mm. The temples are long enough to extend beyond your ears, so the ends can be changed to match the contours of your head behind your ears.
How To Choose Better Night Driving Glasses?
Driving at night has a high accident rate because of poor visibility, blinding headlights, and fatigue. Now the market exists a few main glasses: sunglasses polarizing lenses, Glasses that use or mimic the first generation of patented technology. So how do you compare the options between driving and wearing glasses?
Night driving lens is relatively special compared with daily driving lens, not only to prevent strong light and see the road more clearly. According to the national motor vehicle driver special glasses standards, QBT 2659-2004 daily light transmittance should be more than 8%, night light transmittance should be more than 75%. Be sure to consult customer service. Ask about the situation. Note that a pair of polarized sunglasses are not suitable for use at night, and the light transmittance must reach the national safety standards.
The Disadvantages of Aspheric Lenses
Here, we will show some disadvantages of aspheric lenses.
The aspheric lens has a relatively small light area. When the eyeball rotates around, it will blur a little when looking at the outside through lens edge. In other words, the visual range of the line of sight becomes smaller.
Human’s eyeball is spherical and the eyeball rotates to the edge. Through aspheric lenses, the objects near the eye appear protruding.
Choose rectangular glasses based on the shape of your face.
If you belong to the oval face, do not choose the too large or angular glasses frame. And do not choose long or square ones. It will be easy to elongate the face and affect the overall appearance. The shape of a round face is the opposite of a square face, so the buying principle of the glasses is basically the opposite of a square face. You need a more angular one to improve the shape of the face, but you need a square face (elongate) principle, that is, use a lower height, higher temple position of the frame.
Size of the glasses frame
Children's glasses should have enough field of vision. Because children have different kinds of activities, try not to choose frames that will produce shadows and blind corners. If the frame is too small, the field of view will be smaller. If the frame is too big, it will be easy to wear instability, and weight will increase. So the frames for children should be moderate in size.
