How to repair rimless glasses?
First, insert the wire into a small hole in the glasses near the bridge. Pass it in and out near the bridge, then repeat the process on the other side near the temple. Once you have the thread locked, you can place the lens. Insert it into the frame and place the wire in the built-in groove. Tighten the wire so it holds the lens perfectly, then trim it to the left. Reinsert the lens into the rimless glasses. Do not try to force it back in. The best way is to cut the wires completely and replace them with new ones. Use the same process as replacing wires. To prevent glasses from popping out, tighten the wires regularly.
How to choose progressive lenses
The progressive lens can effectively control the deepening of myopia, but there is no reliable empirical evidence. At present, the height of the lens frame is only about 30mm. The distance from the design of the transition interval is not enough, and the comfort of the eye is difficult to adjust the short distance. From the quality and technology, the foreign brand design process is stable and mature, but the price is too high, there are still a lot of people who are not easy to adapt. The parameters of progressive lenses need to be determined by strict optometry.
The purpose of glasses donation activities.
Regular social donation activities should be carried out in a planned way. For the poor in the rural areas of the disaster area and the poor in the urban districts, donations of materials or funds can not only feel the warmth and humanistic care of society in life and material, quickly resuming production and rebuilding homes. It gives them a sense of psychological security and stability, which is more practical than physical help.
TERAISE Polarized Clip-on Sunglasses Over Prescription Glasses
The use of a yellow night vision clip helps reduce the glare of other vehicles' lights effect, and a nearsighted night vision clip can improve the safety factor of night driving. You can wear myopic prescription night vision glasses for a small amount of money, saving at least $350 / euro. It only weighs 4 grams. With a strongly polarized lens, the glare can be weakened, simple, and beautiful. On cloudy, rainy, or foggy nights, it's safer to wear a night vision clip. They have 18 months of quality assurance and comprehensive customer service.
Replace the nose pad on your glasses
Remove the screws clockwise and use a toothpick to remove the things left of the broken pads so that the new one can be installed. The next step is to fix the nose pad that we just removed from it. Hold the glasses and then the hole for the nose pad is up, then place the nose pad in and press it with your finger. Then you can see that the round hole in the nose pad overlays with the round hole in that part, and at this time, you can turn the screws. When you finally turn it, you usually turn it three times to hold the nose rest in place. Often, the nose pad can be swung back and forth after installation. This is to match the different shapes of our noses.
How to Test Blue Light Glasses (Amber and Red Lenses)
This section will show you how to test blue light glasses with amber or red lenses.
1. The Black and Blue Squares Test
1. Prepare black and blue paper.
2. Wear your blue light glasses after sunset and check whether both paper appear black.
3. If they do not appear black, your blue light glasses can’t block all blue light.
2. RGB Color Chart Test
1. Prepare an RGB color chart as follows.
2. Wear your blue light block glasses and look at the chart.
3. After wearing blue light blocking glasses, if the B section becomes black and the G section becomes darken, it shows that your blue light glasses block blue light and some filter some green light.
4. The less bright the green circle with your blue light glasses, the better they are.
Besides the above ways, you can ask the professional optician to perform a professional blue light glasses test, which would be more reliable. After that, you can know whether your glasses work effectively to block blue light.
What’s more, if you want to purchase a pair of effective blue light blocking glasses, you can try Koalaeye Optical. It is cheap and provides free shipping services.
How do you clean an eyeglass case?
Sprinkle a little water on the glasses case first, to soften the dirt and dust on it. Brush gently with a soft brush to avoid damaging the glasses case. The inside of the case needs to be cleaned with a brush. Use a rag to wipe the surface of the glasses case for moisture and dirt. Wash it several times with a wet cloth. Use paper towels to dry the surface and interior. And then dry in the sun.
