Anti-fouling Coating
The lens coated with anti-reflection film is pretty prone to stain, and the stain will affect the transmittance of the lens. Microscopically, the anti-reflection film shows a porous structure, therefore, the oil is very easy to soak in it. The solution is to coat a layer of anti-fouling film with anti-oil performance on anti-reflection film. The film is very thin and will not change the optical performance of the anti-fouling film. The material is mainly fluoride. There are two processes, one is the immersion method, one is the vacuum coating method (the most commonly used).
Suggestions for Using Varifocal Glasses
If it is difficult for you to get used to the new varifocal glasses, here are some suggestions for you.
1. Wear the varifocal glasses consistently so as to let your brain learn how to use them.
2. The most common accident is tripping when getting used to new varifocal glasses. So, you can mix up your routine to keep your brain active and prevent you from tripping up.
You can also ask those who wear varifocal glasses to give you some advice.
Sales points of note for color changing lens
The discoloration rate of the lens is related to the intensity of ultraviolet light. The stronger the ultraviolet light is, the faster the discoloration rate will be, while the vice versa. The degree of discoloration is related to the ambient temperature. The higher the temperature is, the color of the lens is slightly lighter. Otherwise, the color is slightly darker. With the progress of manufacturing technology, the discoloration rate, especially the fading rate of the discoloration lens has been greatly improved, and the interference of temperature on the color depth is becoming less and less. Either glass or resin lenses react only with ultraviolet light, not visible light, so in some environments, they do not darken.
Safety effects of non-prescription glasses
Safety glasses are available in a variety of styles for different users. There were glasses to protect his eyes from shocks or damage, like those used by people who lost an eye in the past. Many of them often wear protective goggles to protect their eyes from injury and to maintain a degree of vision. Safety goggles made of shatter-proof materials have become a staple in many industrial places, from factories to construction sites. Because in such an environment, the likelihood of being hit by debris or mud is very high.
Have a try and confirm the front and side of the glasses.
Confirmation data: pupil height, flat frame surface, size of frame surface, the harmony of nose arc, the contact area of nose support, size of temple bend. Finally, remember a big principle: You should have no sense of pressure, and in a small range of motion, the frame does not shift. Good glasses should be perfectly integrated with the face so that people can not feel the existence of glasses. Good design is invisible. The lens above 800 degrees will be slightly heavy, so it is not recommended to choose the elastic temple and smooth metal temple. The temple is too slender, and at the same time is all metal, easy to slide frequently.
Can I get a prescription for contact lenses?
Once a contact lens prescription is established, you are entitled to a copy. In some cases, this may occur after a diagnostic match. In many typical GP lenses and special designs, such as bifocal, annular, keratoconus, or postoperative, it may take several examinations before a successful match can be made and a prescription can be provided. If contact lenses are not issued by a doctor, it is important that whoever dispenses them is completely accurate. A soft lens Rx usually includes lens material name, design, power, base curve, and diameter. GP lens prescriptions usually have this information and more, like perimeter curve radius, center thickness, special perimeter design, and optical area diameter.
The frames should be firm.
What kind of glasses are not easy to damage? It should be said that there are only two types of such frames: full metal frames full non-metal frames. However, be careful when choosing these two frames. Younger children prefer to move, and self-control is poor, so choosing a full non-metal glasses frame is appropriate. Although the middle school children are active, the self-control will be relatively strong, so you can consider the choice of a full metal glasses frame.
