How to Adjust Glasses If They Pinch Your Nose
In some cases, glasses will pinch your nose, so you also need to adjust them, too. If the glasses frames are metal, you should simply widen the plastic nose pads using your thumbs until the frames fit comfortably. If the glasses frames are plastic, you should soak the arms of your glasses in warm water for 30-60 seconds, and gently apply upward and outward pressure on the end of the arms to get a more relaxed fit.
After that, your glasses will become more suitable.
Unfortunately, not all glasses can be adjusted by yourself at home. You can’t adjust some glasses which are based on the material of your glasses. For example, the glasses with the following material can’t be adjusted at home:
1. Aluminum alloy.
2. Memory plastic.
3. Titanium or memory titanium.
If your glasses are made of these materials, you can’t adjust them by yourself at home. If something goes worse, you need to buy a new pair of glasses. It is also risky to adjust the rimless or semi-rimless glasses by yourself at home.
As for how to tighten glasses or how to adjust glasses, you may have brief knowledge after reading this post. If your glasses are already broken or you want to get a pair of new glasses, you can try Koalaeye Optical, which is cheap and has a free shipping service.
Do all glasses come with nose pads?
The glasses without the nose brace are plate glasses. In reality, there is still a nose pad, but it is relatively small and it's part of the frame. The westerners have high nose bridges, and many glasses have no or very small nose pads. For example, Harry Potter's glasses have no nose pads. European and American brands will change their nose pads for the Asian market. Eyeglasses without a nose pad rely on the bridge of the nose to support the center beam. It's hard for Asians to stand up, and their eyes are more protruding than sunken like westerners. Glasses are usually demanded to keep a 12mm distance between the lens and the eyeball, otherwise, the optical performance will have a great impact.
Can clear lenses be polarized?
At present, there are no clear polarized lenses. A polarized lens is a thin film vertically arranged with silicon crystal coating placed inside the lens, just like a shutter, which covers the parallel light and only allows the vertical light to pass through. In this way, the glare from all directions can be eliminated, so it is clear and comfortable to wear. Transparent polyamide, the material of nylon lens, is a new variety of polyamide. The material of the nylon lens is mainly transparent polyamide. Due to the effect of the light filter, only light from a specific direction is allowed to pass through the lens, which filters the dazzling light from the sun on the water, land, or snow very well. It can not only make the landscape soft, clear, and natural but protect the eyes to a certain extent.
Common sense of glasses maintenance
Do not wear glasses when doing strenuous exercise to avoid deformation caused by knocking. Take off your glasses when sleeping or lying on your desk to avoid distorting your glasses. Use special glasses cloth to wipe glasses, and can use water and dishwashing essence to clean. Avoid using paper towels, handkerchiefs, or clothes. Deformations of memory materials are not often demonstrated to prevent breakage of joints or welds. If it is uncomfortable to see things, or the frame appears obvious uneven, you need to take it to the optical shop to find a professional to adjust.
Why the lens coating is not uniform?
Sometimes we find differences in the color between the convex and concave surfaces, between the center and the edge of the lens, and the anti-reflection effect between the convex and concave surfaces. his is mainly because the lens coating is that it is plated on one surface and then turned over to another surface. And Areas with small curvature changes are easy to coat. So the center of the lens has reached the desired thickness of the film but the edge has not. At the same time, the different curvature of the convex surface and concave surface causes the different coating speed. So the surface of the lens will show green in the center and lavender red or some other color at the edges.
Optical Stores Provide Customer Experience
Traditional single product marketing has been far from meeting the needs of customers. It is necessary to apply practical artistic aesthetics to the decoration design of physical eyewear stores, product packaging, and marketing planning, to increase customers' experience of the store, increase store goodwill, brand memory, interest in the product, and stimulating customers' consumption. In reality, most eyewear retail stores are making great efforts in product selection, product display, consumer experience, marketing activities, service methods, and other aspects. For example, the introduction of themed display scenes in traditional optical stores, the layout of bricks-and-mortar stores of e-commerce to increase consumer service experience, and so on have achieved good results.
Is titanium alloy necessarily worse than pure titanium?
In the common case, the introduction of a titanium frame will have a detailed material label, what titanium and what material is it made of, such as titanium nickel alloy, titanium aluminum vanadium alloy, and so on.
The composition of titanium alloy determines the quality and price of the frames.A good titanium frame is not necessarily worse or cheaper than pure titanium.It is difficult to ensure the quality of titanium alloy which is very cheap in the retail market.In addition, titanium alloy is not to reduce the cost, but to improve the performance of the material.Usually, the memory frame on the market is made of titanium alloy.
