Contact Lens Materials - HEME Mixed Materials
Using HEMA as the matrix, other monomer components are added to improve the hydrophilicity, oxygen permeability, anti-precipitation, and other functions of the lens.
Linda Multi Focus ™ Blue
Combining color and pattern, these women's reading glasses are definitely a stylish choice. The complex square frame features scratch-resistant and impact-resistant lenses with UV sun protection when worn outdoors, while a leopard print hard-shell with interior markings and a handy cleaning cloth will protect your glasses.
The Disadvantages of Polycarbonate Lens
In this section, we will show you the disadvantages of polycarbonate glasses.
First, the polycarbonate lens is expensive than other regular lenses. It can cost up to double the price of regular eyeglasses.
Second, compared with high-index lenses, polycarbonate glasses have a lower abbe value, which is used to measure the dispersion of light for different eyeglasses lens materials. Polycarbonate lens rates lower mean they have the potential to cause slight chromatic aberrations in your peripheral vision.
Third, compared with Trivex lens, polycarbonate lens has bad durability since they are thinner and lighter.
How to Clean Glasses
To clean glasses by yourself, you need to be careful and use the correct way to avoid some damage to the glasses such as scratches, etc. So, follow the below steps to clean glasses lens.
1. Before cleaning the eyeglasses, you need to wash and dry your hands first. You can use the soap to wash your hands dry them.
2. Rinse your glasses under a gentle stream of tap water. This way will remove dust and other debris and avoid causing scratches on your lenses. But one thing you need to pay attention to. Please do not use hot water since it can destroy some eyeglasses lens coatings.
3. Use a small drop of lotion-free dishwashing liquid to each lens. You can only use lotion-free brands.
4. Then gently rub both sides of the lenses and all parts of the frame. Make sure to clean every part of the eyeglasses.
5. Rinse both sides of the lenses and the frame. Make sure to remove all traces of the soap. Otherwise, it will cause the lenses to be smeared when you dry them.
6. Shake youreyeglasses to get rid of the water on your lenses gently and inspect the glasses carefully to make sure they are clean.
7. Then dry the lenses and frame with a clean and lint-free towel. Make sure the towel is clean, or the dirt or debris on the towel will smear and scratch your glasses.
After all steps are finished, you also need to check your glasses again and check whether they are clean.
As for how to clean glasses, you can follow the above steps. But when cleaning your glasses, you should be careful enough. When cleaning your glasses, something you can’t do. In the following section, we will list some of them.
Driver's protective glasses
The principle of the driver's protective glasses is to use the special film on the glasses to reflect the strong light hitting the glasses back to protect the eyes. It can protect against ultraviolet, infrared and blue light on foggy and rainy days. In snowy weather and at night, the wearer can see the scenery more clearly, and it can also increase the vividness of red, yellow, green, white, and other colors, and eliminate the glare and reflected light of the oncoming cars when meeting cars at night.
Uvex Stealth OTG Safety Goggles
They provide more protection and coverage than other prescription safety glasses. Due to the full seal around the eye, these OTG safety goggles prevent chemical splashes, and bumps, and scratches, making them wonderful general-purpose safety goggles to wear over your prescription glasses. Dura-Streme's scratch-resistant coating helps keep the lenses crystal clear, which is especially important when wearing the underlying glasses.
What is the cheapest way to buy prescription glasses?
Optometry must be accurate. Optometry is the main basis for glasses. The accuracy of optometry is directly related to the success rate of the glasses prepared. Optometry must be accurate first, and the difference between the upper and lower levels should not exceed 12.5 degrees of the prescription. Secondly, the astigmatism axis should be accurate, and the general axis difference should be limited to plus or minus l to 3 degrees. In addition, the interpupillary distance must be accurate, and the interpupillary distance must be equal to the optical center distance of the lens. If you do not pay attention to the above-mentioned checkpoints in optometry, the prepared spectacle lenses will have blurred vision, prolonged visual fatigue, dizziness, nausea, and even diplopia. Optometry is best to go to a professional eye hospital. For children’s optometry or to wear glasses for the first time, you must use mydriatic optometry to be accurate. You can also check if there is any problem with the fundus, and go to the hospital to get more accurate optometry.
