FASHION OPTICAL
The founders of FASHION OPTICAL thought glasses are an art. Space design, color, tone, and designer of the glasses are all visual fusion from concept to creation. They provide the best customer service and got a wonderful reputation. From the conservative exotic to all over the world, they have the coolest glasses. Anyone can reach it. In 2012, Morgan launched them.GIANNI sunglasses line drafted and designed by Morgan. They use only the best acetate, which is made personally and produced by the famous Marzuchelli factory in Italy. Many Hollywood celebrities have used this collection.
The correct method for lens cleaning
Wet it with water first, and then add a little detergent or hand sanitizer to each lens. Dip your fingers to the back of the lens, and then scrub with your fingers. Be careful not to use too much force to prevent the lens from being worn out by grit.
The key here is to rinse. First of all, never use hot water, because hot water will cause the lens to expand due to heat, which will crack the film in the resin lens.
Finally, you should rinse with cold water, do not wipe with a cloth, because any glasses cloth or suede can not perfectly wipe the lens, even the more you wipe it, the more indistinct it gets. If there is hard dust in the cloth, it will scratch the lens.
How to buy prescription glasses online
Consumers should choose different styles of frames according to their age and professional characteristics. Because everyone has different face shapes, different interpupillary distances, and different diopters, the size of the frames should vary from person to person.
Lenses are divided into glass lens, resin lens, and PC lens, and you can choose according to your preferences. The glass lens has a stable refractive index, good abrasion resistance, and stable optical performance, but it is relatively heavy and easy to break. Resin lens with high light transmittance is light, safe, and not easy to break, but the surface is easy to wear. PC lens has a high refractive index, but the surface is easy to wear.
How to adapt to progressive lenses?
People who are prone to motion sickness or have inner ear diseases may suffer dizziness, nausea, vomiting, and other symptoms due to their inability to tolerate the slight deformation of the visual objects, so they need to pay more attention when wearing them. For people who have not worn reading glasses before, it is not recommended to wear graded multi-focus glasses directly because their eyes will not be able to adapt quickly.
Clean Glasses Properly
If the glasses are dirty, don't just wipe them with other cloth. If you use some hard cloth to wipe, it is easy to cause scratches in the lens. Generally speaking, the following cleaning methods are all feasible.
1. Use neutral or alkaline cleaning agent. Remember, toothpaste cannot be used as a substitute for the cleaning agent for spectacle lenses. General optical shops also sell lens cleaners in small bottles, which are easy to carry.
2. Go to the optical shop for professional ultrasonic cleaning. General optical shops provide free cleaning services. The ultrasonic cleaning machine can fully clean every gap and groove of the glasses.
3. Rinse the lens with tap water. Hold the frame in one hand and the cleaner in the other hand. Rub it slowly against the lens, and then rinse it off with clean water. Then wipe it with a glasses cloth or let it dry naturally.
In addition to the glasses cannot be cleaned with alcohol, you should also pay attention to their placement for daily maintenance. Try to avoid putting it under high temperature, and avoid oily, smoke, etc. If you don't use them, put them in the glasses case.
The working principle of driving glasses
The driving glasses are designed according to the polarized angle and radian of the lens and the principle of precision optics. It can only let the beneficial light pass through, and other light sources, like strong sunlight, car headlights, and other light sources are filtered, to eliminate the interference of external light, and avoid the appearance of eye-catching, dazzling, and other situations. That's basically how the driver glasses are designed.
About the early domestic anti-reflection coating lens
Chinese coated lenses appeared in the mid-1980s. At that time, Europe (such as France and Germany) and Asia (such as Japan, Singapore, and Taiwan) had already launched coated lenses to the market, and the grade of lenses was evaluated based on the quality of the anti-reflection effect. Among them, Germany and France were the two leading countries in technology. Technically, the use of French original film material (referred to as H2) can reduce the effect by 99.98% (refers to the light transmittance, the same below). Almost you can not see the reflection, but the material is expensive. Therefore, the coating lens which is currently used in the world is born. The anti-reflection effect is controlled at about 98%, so the coating cost is greatly reduced. And it is accepted by consumers because it presents various colors, especially green. At the same time, because at the same time, it can be easily distinguished from non-coated lenses. It can reflect the high-grade film lens, and it is accepted by the sales staff.
