Where to Buy Glasses Without Prescription?
However, if you need a pair of glasses without prescription, where can you buy them? To buy them, Koalaeye Optical is recommended. It is an online glasses store and provides all kinds of glasses, sunglasses and frames. In addition, these glasses are stylish and cheap. So, if you want to get a pair of plain glasses, try Koalaeye glasses.
The principle of the anti-fog lens
Ordinary lens materials and water are wet, so water vapor is easy to fog up on the top. If this wetting relationship can be broken, the water vapor can be prevented from fogging up on the surface of the lens. The anti-fogging film is a kind of film which can prevent or avoid water mist agglutination effectively. It is divided into organic film and inorganic film. The inorganic film is mostly used for building, car window glass fogging prevention. For lens anti-fogging, the organic film is more used. The method is to wipe, spray (with an anti-fogging agent, and so on).
Pair Eyewear
Pair is designed for children. There are only a few styles of frames, but there are hundreds of colors and patterns on top of the frames, and the top of the frame base can change colors, from pure pink to rainbow tie-dye to NBA logos. Pair also makes limited-edition tops and works with major brands like Marvel and Harry Potter to create themed styles that allow you and your children to showcase your personality. Each frame starts at $60, including standard prescription lenses, and the frames cost $25.
Uvex Stealth OTG Safety Goggles
They provide more protection and coverage than other prescription safety glasses. Due to the full seal around the eye, these OTG safety goggles prevent chemical splashes, and bumps, and scratches, making them wonderful general-purpose safety goggles to wear over your prescription glasses. Dura-Streme's scratch-resistant coating helps keep the lenses crystal clear, which is especially important when wearing the underlying glasses.
What glasses are best for night driving?
You had better not make myopia sunglasses directly with sunglasses frame. The radian of a lot of sunglasses is too high. When the nearsightedness lens that uses 400 degrees directly is squeezed into radian even 600 degrees to 800 degrees frame. The actual degree of the lens and other parameters will change. And, to meet the processing that sunglasses frame needs, the pupil distance of most myopic sunglasses was magnified 4 mm above. This is eye damage! No matter what style or look your glasses are, make sure they are specifically designed to eliminate glare and improve your view.
Data obtained by computer optometry alone may not be accurate.
The first thing is to go to the optometry store, or the hospital to do a glasses degree test, namely to get single optometry. The precision computer optometry has errors, and computer optometry is only used to measure separately monocular degrees. What we need is the best visual effect of the binocular match, so the exact prescription needs to be carefully confirmed by comprehensive optometry. Optometrists will ask everyone to try on the insert lenses again, and even need to repeatedly try on several degrees of lenses, in order to finally determine which degree is the most appropriate, because even the professional optometry data is only a rough range, only based on the data of glasses is not necessarily suitable for their own. You can use a focometer to measure the actual parameters of the glasses you are wearing. If you are still unsure of your prescription, it is recommended to fax, mail, or mail your prescription to the merchant when placing your order.
How to repair rimless glasses?
First, insert the wire into a small hole in the glasses near the bridge. Pass it in and out near the bridge, then repeat the process on the other side near the temple. Once you have the thread locked, you can place the lens. Insert it into the frame and place the wire in the built-in groove. Tighten the wire so it holds the lens perfectly, then trim it to the left. Reinsert the lens into the rimless glasses. Do not try to force it back in. The best way is to cut the wires completely and replace them with new ones. Use the same process as replacing wires. To prevent glasses from popping out, tighten the wires regularly.
