Features of Diamond Face Shape
Before proceeding with the glasses for diamond face shape, you need to know how to figure out your face shape and the features of the diamond face shape. This section will list some features of diamond face shape.
One of the most common features of diamond face shape is the presence of angles and pointed features and the widest part of the face is the cheek. And the forehead and the chin appear to give height to the face.
The forehead of the diamond face shape is not broad or wide. The size of the forehead is smaller than the cheeks indicating the upper part of the curve of the diamond. The shape of the cheeks is angular and the angles of the face are the widest feature on the face with the cheekbones placed a little higher. The jawline of the diamond face shape is narrower and is smooth with no angles or pointed features. And the lower part of the face is quite pointed or lacks angular features.
How to stop glasses hurting behind ears?
When adjusting glasses to the optical shop, you can let the staff check if the bending hook is flat. If there is a problem, put it on the polishing machine. The most important thing is that when adjusting the glasses, the height of the glasses temple should be adjusted according to the shape of each person's face, to further increase the comfort of the glasses. Furthermore, if you do not want to go to the optical store, you can make the glasses temple a little loose at home or put a little cotton or paper towel in the ear to prevent friction. You can buy soft eyewear online or at an eyeglass store to prevent ear friction and injury
Design principle of progressive multifocal lens
For the same piece of the lens, the top is used to see far, the bottom is used to see close. The upper and lower degrees are different.
There is not a sudden change in the distance degree fixed above the lens to the near degree fixed below the lens, but a gradual transition between the two through gradual changes in refractive power, which has special benefits over common bifocals or trifocal lenses.
The glasses are too loose or too tight at the temple.
If your glasses are too tight on your temples, you will feel uncomfortable. On the other hand, if your frames are too loose, it can make you look not energetic. Either way, you can adjust the frames at home to make them more comfortable. If the arm squeezers your temples. If the frames are metal, hold your lenses in place with your less-used hand. Use your dominant hand to gently press outwards on the corner of the frame, between the hinge of the frame and the lens. Repeat this step on the other side of your body to make your temples looser. If the frame is too loose from the temple. Again, for metal frames only, use the same method as you used to relax the frames, but apply slightly inward pressure on the corner between the hinge and the lens. Repeat on the other side, tightening the fit around the temple. Adjusting the temples of rimless, half-rimless, or plastic frames can break them. You are advised to take these frames to the optical shop for adjustment.
How to Choose Reading Glasses?
If you need reading glasses when using a computer, you may want to choose a lower reading glasses power. This is because most people view their screen from a greater distance from their eyes than when they are reading a book or a magazine.
However, if you need reading glasses for looking at something very close or very small, you may need a pair of stronger power glasses.
In most cases, when two reading glasses’ powers seem equally suitable, choose the glasses with the lower power. Picking reading glasses that are too string typically will cause more discomfort problems than reading glasses that are a little too weak.
EyeBuyDirect Ride
Rimless glasses provide the minimalist option for eyewear who want their glasses to blend in with their face, or want a larger field of vision. These aviator-shaped rimless glasses are very stylish, with the red or blue at the temple tip highlighting the colors. An adjustable nose pad provides a comfortable fit.
The characteristics are different.
Cellulose acetate materials have high wear resistance, and hardness and texture are very good. The sunglasses are made of acetate fiber plate with plate cutting and processing. The main materials are plate and plate plus steel sheets. The characteristics of the plate are that they are not heavy. It has a hardness, good gloss, and steel combined to strengthen the firm performance. And they have a beautiful style, not easy to deform and change color, durable. The plated one deduces fashion, easy-to-match clothes, and integrates the thickness of the plate and the texture of the metal, reflecting the personality style.
The chemical name of the CP material is propionic acid fiber, cellulose molecules for the hydroxyl propionic acid in the polymer. It has good weather resistance and low-temperature resistance. The current market of this material is mainly used in glasses, toys, and a variety of shells. It is one of the acrylic resin derivatives. The material is a large sheet and can be dyed in a variety of colors.
