Vintage, Large Round Glasses
Round frames will be popular in 2021, but not only that, square and rectangular face shapes will work well. They can be mixed and matched with everything from business clothes to stylish sweaters and hats. If you're looking for a bolder look, oversized round frames are perfect for you. Smaller frames are more elegant, but you can opt for stylish colors.
Why do you need rimless glasses?
Traditional full-frame glasses can sometimes make your face look heavy, especially if the lenses are thicker. Rimless glasses can replace heavy frames without weight from the rims. This reduces the pressure on the nose pad, making your face feel lighter and more comfortable.
The fabric of eyeglasses cloth
Ordinary fabric: They are only applicable to the surface that has been cleaned.Because the ordinary fabric has no space to accommodate dirt, the surface of the cloth will be very dirty, and difficult to wash clean.
Microfiber fabrics: They are used wet to emulsify dirt and oil, and the microfiber is easier to wipe off. It is highly absorbent, making it very quick to clean the spilled liquid.
Fine fiber double velvet fabric: It feels soft, gentle, with the plump texture, but more single velvet.
Suede fabric: The feel and appearance are quite like natural suede, fine and smooth, soft and plump, used to wipe glasses. It will be clean and won't scratch the lens.
What Is Anti Reflective Coating?
Anti reflective coating, also known as AR, anti-glare, no-glare, or glare-free coating, can provide benefits to your vision. Anti reflective coating is added to lenses to reduce glare caused by light hitting the back of the lenses to improve your vision and make your eyeglasses more visually attractive.
Anti reflective coating will eliminate all reflections from the front and back surfaces of your lenses. Hence, more light is able to pass through your lenses which improves your vision. At the same time, fewer distractions are visible and the lenses are hardly noticeable, especially in the dark. So, is anti glare worth it? Most people agree that.
Is It Bad to Wear Reading Glasses When You Have Perfect Vision?
Can reading glasses hurt your eyes? This section will answer this question. One of the most common reasons for people to wear reading glasses is to see things clearly. If you read a lot or perform other tasks at close range for long periods, your eyes may feel strained. In general, strained eyes with near vision are associated with farsightedness. However, you might have similar symptoms just by observing something up close for too long. For this reason, reading glasses may be helpful.
However, do reading glasses hurt your eyes? No, wearing reading glasses should not hurt your eyes, even if you don’t have any problems with your eyesight. Meanwhile, it may take some time to get used to the reading glasses.
What color coating is good?
The purpose of plating anti-reflection film is to reduce the reflection of light. But because it is impossible to be completely free of reflected light, there will always be some residual reflection on the surface of the lens that causes the visible color. Someone asks which kind of these residual color is best. It does not have a standard actually. It is mainly based on a personal preference for color. More on the market at present is green color. However, these residual colors can initially help us to judge the thickness of the film: when the film is thin (the thickness is less than 139nm), the reflected light will show light yellow, and when the film is thick (the thickness is more than 139nm), it will show blue-green. The current multi-layer anti-reflection film thickness is about 0.3μm.
What is the cheapest way to buy prescription glasses?
Optometry must be accurate. Optometry is the main basis for glasses. The accuracy of optometry is directly related to the success rate of the glasses prepared. Optometry must be accurate first, and the difference between the upper and lower levels should not exceed 12.5 degrees of the prescription. Secondly, the astigmatism axis should be accurate, and the general axis difference should be limited to plus or minus l to 3 degrees. In addition, the interpupillary distance must be accurate, and the interpupillary distance must be equal to the optical center distance of the lens. If you do not pay attention to the above-mentioned checkpoints in optometry, the prepared spectacle lenses will have blurred vision, prolonged visual fatigue, dizziness, nausea, and even diplopia. Optometry is best to go to a professional eye hospital. For children’s optometry or to wear glasses for the first time, you must use mydriatic optometry to be accurate. You can also check if there is any problem with the fundus, and go to the hospital to get more accurate optometry.
